4 MODULAR (4 + kitchenette)

House consisting of 4 modules 9 x 2,5m total living area 90m2 / 968.7 ft².

Example of a 4 modul interior house.

Example of a 4 modul layout, which can be freely adjusted upon the client 's request. 

4 -Modular house

Below please find an example of the layout of a 3 modular house. This house can be tailor made. By clicking this picture you can enlarge the picture.


Description of the materials needed to build this house:

The supporting structure -

Outer dimensions of the assembled steel structure: (Width x Length x Height):

10 x 9 x 3.4 (m), internal height between the supporting profiles is 3 m.

Ground floor and ceiling is 10 x 9 m = 90m2.


Roof, ceiling -

flat roof (slope of about 7%) consisting of K-control panels 140 mm thick, galvanised tin roof, total size 11m x 10m. Ceiling - air gap between the K-control panels and drywall ceiling, might be used foam insulation. To reinforce the ceiling and roof, treated joists are used; height is 120 mm and 80 mm.


Floor -

tin sheets, EPS insulation -thickness of 200 mm, treated joists 80 mm, decking 22 mm, OSB boards or waterproof plywood, then floating floor PVC flooring or wooden floor.

Total floor area is 90 m2.


Sheathing -

Entrance glazed door from the terrace 1.5 x 2.89 with ventilation at the top at the height of 0,4m, from the hall 0.9 x 2.89 m, glazed with ventilation on the top at the height of 0.4 m height.

Glass walls are same in the bedroom, hall/open space, bathroom and both rooms, i.e. 5 x 2, 2 (W) x 2.89 (H) m, Solid or divided door with ventilation at the height of 0,4m. To the glazed terrace 2 x (2.5 (W) x 2.89 (H) m. Standard size of the WC window. Triple or double glazing might be used - depends on the client.

The outer sheathing ng uses PUR panels with a thickness of 10 cm, internal sheathing uses mineral wool 8 cm thick, vapour barrier, drywall.

Panelling and glass panels will be outside attached to the steel frame (L profile) adapted for holding the panels and glass panels at the bottom, and on sides and on top treated wooden beams and planks will be used.


Materials needed for wall sheathing:

PUR panels:

Back side: 10, 2 x 3, 4 m, entry wall approx. 15m2, living room 9m x 2m,,front terrace wall 2,7 x 3,4 m = 9,2m2. Total area of the PUR panels is 68m2 plus sheathing round the windows and doors 10m2, TOTAL 78m2.

The internal walls -

Interior solid door 2, 89 (H) x (W) 0, 8 - 5x, interior WC door and dressing room 2x 0, 8 x 2,2m. 100mm drywall to be able to hang cabinets - reinforced where we are planning to hang cabinets, reinforced with 18mm OSB, or reinforced drywalls. .

Total mineral wool for the interior walls including partition walls is 78m2 plus 135 m3 that is 213 m2. The area of dry walled walls and interior sheathing 215 m2, plus the ceiling 90m2, TOTAL is 305m2. OSB for reinforcement is approx. 55m2. 


LEGEND:

LOŽNICE = bedroom           POKOJ = ROOM

OBYTNÁ H = open space   TERASA = ´TERRACE

KOUP = bathroom